- Basic machine consisting of two light-alloy trolleys, one of which is mounted on axial bearings and slides on chromed and ground rods d. 25mm.
The translation lever, in addition to making the movement, acts on an index that shows on a graduated scale the values of the tube to be welded. The handy drawer contains all reductions and accessories. - Electric facing tool with insertion consent and operated by a control on the handle.
- heating mirror running on a d. 25 mm rod, PTFE-coated and with
temperature adjustment. It is also easily removable for manual use. - Right and left clamps d. 250 mm pivoting by 7.5°, thus suitable for the fabrication of
segmented bends (15° per weld) and clamp reductions d. 180 - 200 - 225 mm. - Right and left clamps d. 160 mm equipped with a locking system that makes them
suitable for welding segmented bends and fittings and are pivoting 7.5° each. - Vice reductions d. 40 - 50 - 63 - 75 - 90 - 110 - 125 - 140 mm.
- Side supports and reductions for all diameters.
| Range: | Ø 40-250 mm |
| Power supply: | 230V single-phase |
| Frequency: | 50 / 60 Hz |
