EURO 315
Workshop welding machine suitable for butt welding of PE and PP pipes and fittings. Equipped with a sturdy frame, it can be tipped inside it, reducing the overall dimensions to facilitate transport and storage operations. It is equipped with pivoting clamps that enable the fabrication of segmented bends with different radii of curvature.
- Basic machine consisting of two light alloy trolleys, one of which is mounted on axial bearings and slides on chrome-plated and ground rods d. 30 mm.
The translation lever, in addition to performing the movement, acts on an index that shows on a graduated scale the values of the tube to be welded.
The practical drawer contains all reductions and accessories. - Electric facing tool operated by a control placed on the handle.
- heating mirror running on d. 40 mm rod, PTFE coated and with
electronic temperature control. - Right and left clamps d. 315 mm equipped with a locking system that makes them suitable
for welding short spigot fittings and also pivoting by 22.5°, thus suitable for the fabrication of segmented bends (45° per weld). - Clamp reductions d. 90 - 110 - 125 - 140 - 160 - 180 - 200 - 225 - 250 - 280 mm.
- Side supports d. 315 mm and corresponding reductions d. 90>280 .
| Range: | Ø 90-315 mm |
| Power supply: | 230V single-phase |
| Frequency: | 50 / 60 Hz |
