PT 250
Butt-welding machine for polyethylene (PE), polypropylene (PP), PVDF and other thermoplastic pipe materials for under pressure pipelines (water, gas and others).
Self-aligning structure and inclined clamps allow for convenient operation.
Digital thermostat allows for quick temperature setting, which can also be viewed via the independent analog thermometer that also operates when power is off.
Electric facing tool with safety microswitch, reversible blades and facing tool stopper, allowing facing to continue on one side only.
Hydraulic power unit complete with accumulator, regulating valve and by-pass valve.
Aluminum reductions ensure maximum rigidity and are equipped with the Beep Beep screwless quick-release coupling system.
The welding machine is manufactured and tested in compliance with current conformity and regulations (UNI 10565 and CE safety regulations).
- Basic d. 250 mm 2-cylinder machine, consisting of four light alloy clamps and with automatic heating mirror release device.
- Removable electric facing tool with reversible blades, stop and safety microswitch.
- Removable PTFE-coated heating mirror with electronic temperature control and independent reading analog thermometer.
- Electrohydraulic control unit complete with pressure regulation, by-pass valve and accumulator.
- Ground support for heating mirror and facing tool.
- Series of aluminum reducers diameter 63, 75, 90, 110, 125, 140, 160, 180, 200, 225 mm.
| Range: | Ø 63-250 mm |
| Power supply: | 230V / 110V single phase |
| Frequency: | 50 / 60 Hz |
Download the data sheet:
ISPM15 fumigated wooden box for transporting and storing your welding machine
Flanges holder: stub end gripping equipment for short spigot flanges
Narrow clamp: beveled upper half clamp for gripping bends or short spigot fittings
LDU Data Logger. for monitoring, detecting and recording welding parameters
Automatic CNC control unit, the automated control version of the welding cycle
MDD, automatic heating mirror lifting device during the exchange phase
