PT 200
Butt-welding machine for polyethylene (PE), polypropylene (PP), PVDF and other thermoplastic pipe materials for under pressure pipelines (water, gas and others).
Self-aligning structure and inclined clamps allow for convenient operation.
Digital thermostat allows for quick temperature setting, which can also be viewed via the independent analog thermometer that also operates when power is off.
Electric facing tool with safety microswitch, reversible blades and facing tool stopper, allowing facing to continue on one side only.
Hydraulic power unit complete with accumulator, regulating valve and by-pass valve.
Aluminum reductions ensure maximum rigidity and are equipped with the Beep Beep screwless quick-release coupling system.
The welding machine is manufactured and tested in compliance with current conformity and regulations (UNI 10565 and CE safety regulations).
- Basic d. 200 mm 2-cylinder machine, consisting of four spheroidal cast iron clamps and with automatic heating mirror release device.
- Removable electric facing tool with reversible blades, stop and safety microswitch.
- Removable PTFE-coated heating mirror with electronic temperature control and independent reading analog thermometer.
- Electrohydraulic control unit complete with pressure regulation, by-pass valve and accumulator.
- Ground support for heating mirror and facing tool.
- Sets of aluminum reducers diameter 63, 75, 90, 110, 125, 140, 160, 180 mm.
Range: | Ø 63-200 mm |
Power supply: | 230V / 110V single phase |
Frequency: | 50 / 60 Hz |
Download the data sheet:

ISPM15 fumigated wooden box for transporting and storing your welding machine

Flanges holder: stub end gripping equipment for short spigot flanges

Narrow clamp: beveled upper half clamp for gripping bends or short spigot fittings

LDU Data Logger. for monitoring, detecting and recording welding parameters

Automatic CNC control unit, the automated control version of the welding cycle