PT 1600
Butt-welding machine for polyethylene (PE), polypropylene (PP), PVDF and other thermoplastic pipe materials for pressurized pipelines (water, gas and others).
Self-aligning structure and inclined clamps allow to operate in full confort and control.
Digital thermostat allows a quick temperature setting, temperature can also be viewed via the independent analog thermometer that also works when power is off.
Electric facing tool with safety microswitch, reversible blades and facing tool stopper, which allows facing to continue on one side only.
Hydraulic power unit complete with accumulator, regulating valve and by-pass valve.
Steel and aluminum reductions ensure maximum rigidity.
The welding machine is manufactured and tested in compliance with current conformity and regulations (UNI 10565 and CE safety regulations).
- Basic d. 1600mm 2-cylinder machine, composed by four steel clamps and with automatic heating mirror release device.
- Removable electric facing tool with reversible blades, stop and safety microswitch.
- Removable PTFE-coated heating mirror with electronic temperature control and independent reading analog thermometer.
- Electrohydraulic control unit complete with pressure regulation, by-pass valve and accumulator.
- Ground support for heating mirror and facing tool.
- Sets of steel and aluminum reductions 1000, 1200, 1400 mm diameter.
| Range: | Ø 1000-1600 mm |
| Power supply: | 400V Three-phase / 230V Three-phase |
| Frequency: | 50 / 60 Hz |
Download the data sheet:
Flanges holder: stub end gripping equipment for short spigot flanges
LDU Data Logger. for monitoring, detecting and recording welding parameters
Automatic CNC control unit, the automated control version of the welding cycle
Electric hoist for lifting and handling facing tool and heating mirror
